PocketLab Voyager 2 Specifications

The specifications of the different sensors are listed, as well as the LED flashing codes

Download a PDF of the Voyager 2 Manual

Voyager 2 Diagram

Led Flashing Codes

Flashing Codes

Battery Life and Charging

PocketLab Voyager 2's battery takes approximately 2 hours to fully charge and last about 20 hours of data collection time.

To charge the battery, connect a micro USB cable to the connector on the PocketLab. Plug the USB cable into a USB charger or computer port.
The LED will blink red every 10 seconds while charging.

Device Requirements

iOS	iPhone 4s and newer iPads - all except iPad 1 and iPad 2 iPod Touch 5th gen and newer PocketLab iOS app
Android	Android OS 5.0 and newer Most phones and tablets made since 2014 Android native app and PocketLab Notebook (thepocketlab.com/notebook)
Windows 10	Built-in Bluetooth 4.2 required Most Windows 10 devices made since 2014 are compatible. PocketLab Notebook - Chrome browser (thepocketlab.com/notebook)
Mac OS	Built-in Bluetooth 4.2 required Most Macs devices made since 2014 are compatible. PocketLab Notebook - Chrome browser (thepocketlab.com/notebook)
Chromebooks	Built-in Bluetooth 4.2 required Most Chromebooks devices made since 2014 are compatible. PocketLab Notebook - Chrome browser (thepocketlab.com/notebook)

PocketLab Voyager Sensor Specifications

Wireless Range	45 m line-of-sight (150 ft)	Memory	up to 50,000 data readings
Battery	Rechargeable via micro USB	Durability	2 m (6 ft) drop protection
Battery Life	20 hrs	Dimensions	3.8 x 3.8 x 1.5 cm (1.5 x 1.5 x 0.6 in)
Wireless Range	45 m line-of-sight (150 ft)	Weight	17 g (0.6 oz)

Accelerometer		Barometric Pressure
Range	+/- 16 g	Range	30 - 1100 kPa
Resolution	0.008 g @ 94 Hz	Pressure Resolution	1.3 Pa
Data Rate	50 samples/sec (real-time) 250 samples/sec (crash-mode)	Absolute Accuracy	0.1 kPa

Gyroscope		Humidity
Range	+/- 2000 deg/sec	Range	0-100 %RH
Resolution	0.1 deg/sec @ 92 Hz	Resolution	1 %RH
Data Rate	50 samples/sec (real-time)	Absolute Accuracy	3 %RH

Magnetometer		Light
Range	+/- 4900 uT	Range	0.01 - 128,000 Lux
Resolution	0.15 uT	Spectrum	220 - 1000 nm
Data Rate	100 samples/sec	Data Rate	4000 samples/sec

Altitude		Ambient Temperature
Range	-5,300 - 9,500 m (-17,400 - 31,000 ft)	Range	-40 - 85 C (-40 - 180 F)
Resolution	11 cm (4 in)	Resolution	0.01 C (0.02 F)
Absolute Accuracy	10 m (33 ft)	Absolute Accuracy	0.5 C (0.9 F)
Data Rate	50 samples/sec

IR Rangefinder		Temperature Probe
Range	0.001 - 6m (0.04 - 20 ft)	Range	-40 - 105 C (-40 - 221 F)
Resolution	1 mm (0.04 in)	Resolution	0.2 C (0.4 F)
Absolute Accuracy	5% of reading	Accuracy	0.5 C (0.9 F)
Data Rate	33 samples/sec
Field of View	25 degrees

Compass
Range	360 degrees
Accuracy	+/- 1 degree
Data Rate	50 samples/sec

FCC Compliance

§ 15.105 - Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference in which case the user will be required to correct the interference at his own expense.

§ 15.21 - CAUTION: if the user makes changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.