The specifications of the different sensors are listed, as well as diagrams of Air and the LED flashing codes
PocketLab Air Diagram
Battery Life and Charging
PocketLab Air battery takes approximately 2 hours to fully charge and lasts 24 hours of continuous recording, or up to 3 days with intermittent measurements.
- To charge the battery, connect a micro USB cable to the connector on the PocketLab. Plug the USB cable into a USB charger or computer port.
- The device charges faster when it is powered off. The red LED light will not blink, but the device will be charging as long is it is connected to power.
Device Requirements
iOS |
|
Android |
PL Air - PocketLab Notebook - Chrome browser (thepocketlab.com/notebook) |
Windows 10 |
|
Mac OS |
|
Chromebooks |
|
PocketLab Air Sensor Specifications
Carbon Dioxide | Barometric Pressure | |||
Range | 0 - 5000 ppm | Range | 30 - 180 kPa | |
Resolution | 1 ppm | Pressure Resolution | 1.3 Pa | |
Absolute Accuracy | ± 50 ppm with calibration | Absolute Accuracy | 0.1 kPa | |
Ozone | Humidity | |||
Range | 0 - 20 ppm | Range | 0-100 %RH | |
Resolution | 20 ppb | Resolution | 0.02 %RH | |
Absolute Accuracy | ± 15% | Absolute Accuracy | 3 %RH | |
Particulate Matter (PM1.0, PM2.5, PM10) | Light | |||
Range | 0 - 500 ug/m3 | Range | 0.01 - 64,000 Lux | |
Resolution | 1 ug/m3 | Spectrum | 400 - 1000 nm (Visible light) | |
Absolute Accuracy | ± 10% | Data Rate | 30 samples/sec | |
Altitude | Ambient Temperature | |||
Range | -5,300 - 9,500 m (-17,400 - 31,000 ft) | Range | -40 - 85 C (-40 - 185 F) | |
Resolution | 11 cm (4 in) | Resolution | 0.01 C (0.02 F) | |
Absolute Accuracy | 10 m (33 ft) | Absolute Accuracy | 0.5 C (0.9 F) | |
Data Rate | 50 samples/sec | |||
Air Quality Index | ||||
Range | 0 - 500 units | |||
Resolution | 1 unit |